Nanomaterial Case Studies: Nanoscale Titanium Dioxide (External Review Draft)

Abstract

This draft document presents two case studies of nanoscale titanium dioxide (nano-TiO₂) used (1) to remove arsenic from drinking water and (2) as an active ingredient in topical sunscreen. The draft case studies are organized around a comprehensive environmental assessment approach that combines a product life cycle framework with the risk assessment paradigm. The document does not draw conclusions about potential risks. Rather, the case studies are intended to help identify what needs to be known in order to conduct a comprehensive environmental assessment of the potential risks related to nano-TiO₂. This draft document is part of a process that will inform the development of EPA’s research strategy to support nanomaterial risk assessments.
Engineered nanoscale materials (nanomaterials) have been described in part as having at least one dimension on the order of approximately 1 to 100 nanometers (nm) and unique or novel properties that arise from their small size. This draft document is a starting point to determine what is known and what needs to be known about selected nanomaterials as part of a process to identify and prioritize research to inform future assessments of the potential ecological and health implications of these materials. Two specific applications of nanoscale titanium dioxide (nano-TiO₂) are considered: as an agent for removing arsenic from drinking water and as an active ingredient in topical sunscreen. These case studies do not represent completed or even preliminary assessments, nor are they intended to serve as a basis for risk management decisions in the near term on these specific uses of nano-TiO₂. Instead, the intent is to use this document in developing the scientific and technical information needed for future assessment efforts.

The case studies are organized around the comprehensive environmental assessment (CEA) approach, which combines a product life-cycle framework with the risk assessment paradigm. Risk assessment relates exposure and effects information for a substance or stressor; CEA expands on this paradigm by including life-cycle stages and considering both direct and indirect ramifications of the substance or stressor. Each chapter includes a list of questions that reflect information gaps in that portion of the document. Some of these information gaps or research needs are specific to the respective uses of nano-TiO₂ either as a water treatment agent or as an ingredient in topical sunscreen. Other research needs may apply more broadly to nano-TiO₂ irrespective of its application, and still other needs may apply even more widely to nanomaterials in general.

Readers are encouraged to consider the questions listed throughout the document and offer specific comments on how individual questions, or research needs, might be better expressed. If additional questions should be included or if information is already available to address some of the questions posed here, readers are also encouraged to provide such comments as well. These and other comments should be submitted as explained below under Additional Information.

Impact/Purpose

The complex properties of various nanomaterials make evaluating them in the abstract or with generalizations difficult if not impossible. Thus, this document focuses on two specific uses of nano-TiO₂, as a drinking water treatment and as topical sunscreen. These case studies do not represent completed or even preliminary assessments; rather, they present the structure for identifying and prioritizing research needed to support future assessments.

Status

Following the peer review workshop, EPA will update the report for the EPA Board of Scientific Counselors to review in public session. The final report will be released following this review.

Citation

U.S. EPA. Nanomaterial Case Studies: Nanoscale Titanium Dioxide (External Review Draft). U.S. Environmental Protection Agency, Washington, DC, EPA/600/R-09/057, 2009.

Date	Description
01- Feb 2007	EPA's Nanotechnology White Paper recommends the development of case studies to identify unique risk assessment considerations and research needed to support risk assessment efforts for nanomaterials.
02- Mar 2007	Conducted internal review of first case study draft document.
03- Nov 2007	Conducted external peer consultation on first case study draft document.
04- Dec 2007	Conducted internal review of second case study draft document.
05- 2008 - 2009	Revised case studies and combined into one draft document.
08- Jul 2009	EPA released the external review draft for public review and comment.
09- Apr 2010	EPA conducted an independent external peer review of the draft case studies document.

Additional Information

Comments on the assessment may be submitted and reviewed using the e-Government Regulations.gov Web site. From the site, select Environmental Protection Agency and the keyword EPA-HQ-ORD-2009-0495 (for the docket ID) to comment on this report.

This download(s) is distributed solely for the purpose of pre-dissemination peer review under applicable information quality guidelines. It has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agency determination or policy.

• Nanomaterial Case Studies: Nanoscale Titanium Dioxide in Water Treatment and in Topical Sunscreen (External Review Draft) (PDF)  (222  pp, 2.1 MB, about PDF)
• Charge Questions to External Reviewers (PDF)  (7  pp, 53.7 KB, about PDF)
• Summary of the 2009 Nano-TiO2 Workshop that was prepared for the BOSC (PDF)  (121  pp, 2.2 MB, about PDF)
• Agency Response to Comments on the draft Nanoscale Titanium Dioxide Case Study (PDF)  (140  pp, 711.9 KB, about PDF)

Related Link(s)

• Nanomaterial Case Studies: Nanoscale Titanium Dioxide In Water Treatment And In Topical Sunscreen (Final)